Kontron AT8404 CLI - Manual (Page 171)

AT8404 Switching Commands
Page 2 - 135 AT8404 CLI Reference Manual
Example: The following shows example CLI display output for the command.
(Broadcom FASTPATH Switching) #show isdp neighbors detail
Device ID 0001f45f1bc0
Address(es):
IP Address:
10.27.7.57
Capability Router Trans Bridge Switch IGMP
Platform SecureStack C2
Interface 0/48
Port ID
ge.3.14
Holdtime 131
Advertisement Version
2
Entry last changed time 0 days 00:01:59
Version : 05.00.56
2.27.12 show isdp traffic
This command displays ISDP statistics.
Term Definition
Device ID The device ID associated with the neighbor which advertised the information.
IP Addresses The IP addresses associated with the neighbor.
Capability ISDP functional capabilities advertised by the neighbor.
Platform The hardware platform advertised by the neighbor.
Interface The interface (slot/port) on which the neighbor's advertisement was received.
Port ID The port ID of the interface from which the neighbor sent the advertisement.
Hold Time The hold time advertised by the neighbor.
Advertisement
Version
The version of the advertisement packet received from the neighbor.
Entry Last
Changed Time
Displays when the entry was last modified.
Version The software version that the neighbor is running.
Format show isdp traffic
Mode Privileged EXEC
Term Definition
ISDP Packets Received Total number of ISDP packets received
ISDP Packets Transmitted Total number of ISDP packets transmitted