Kontron AT8404 CLI - Manual (Page 179)

AT8404 Quality of Service (QoS) Commands
Page 3 - 5 AT8404 CLI Reference Manual
service mappings. If specified, the 802.1p mapping table of the interface is displayed. If omitted, the most recent
global configuration settings are displayed. For more information, see 2.5 “Voice VLAN Commands” on page 2 - 32
.
The following information is repeated for each user priority.
3.1.8 show classofservice ip-precedence-mapping
This command displays the current IP Precedence mapping to internal traffic classes for a specific interface. The
slot/port parameter is optional and is only valid on platforms that support independent per-port class of service
mappings. If specified, the IP Precedence mapping table of the interface is displayed. If omitted, the most recent
global configuration settings are displayed.
The following information is repeated for each user priority.
3.1.9 show classofservice ip-dscp-mapping
This command displays the current IP DSCP mapping to internal traffic classes for the global configuration settings.
The following information is repeated for each user priority.
3.1.10 show classofservice trust
This command displays the current trust mode setting for a specific interface. The parameter is
optional and is only valid on platforms that support independent per-port class of service mappings. If you specify
an interface, the command displays the port trust mode of the interface. If you do not specify an interface, the
command displays the most recent global configuration settings.
Format show classofservice dot1p-mapping []
Mode Privileged EXEC
Term Definition
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which the user priority value is mapped.
Format show classofservice ip-precedence-mapping []
Mode Privileged EXEC
Term Definition
IP Precedence The IP Precedence value.
Traffic Class The traffic class internal queue identifier to which the IP Precedence value is mapped.
Format show classofservice ip-dscp-mapping
Mode Privileged EXEC
Term Definition
IP DSCP The IP DSCP value.
Traffic Class The traffic class internal queue identifier to which the IP DSCP value is mapped.
Format show classofservice trust []
Mode Privileged EXEC