Kontron AT8404 CLI - Manual (Page 248)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 34
4.7.7 sntp server
This command configures an SNTP server (a maximum of three). The optional priority can be a value of 1-3, the
version a value of 1-4, and the port id a value of 1-65535.
4.7.7.1 no sntp server
This command deletes an server from the configured SNTP servers.
4.7.8 show sntp
This command is used to display SNTP settings and status.
4.7.9 show sntp client
This command is used to display SNTP client settings.
Format sntp server [ [ []]]
Mode Global Config
Format no sntp server remove
Mode Global Config
Format show sntp
Mode Privileged EXEC
Term Definition
Last Update Time Time of last clock update.
Last Attempt Time Time of last transmit query (in unicast mode).
Last Attempt
Status
Status of the last SNTP request (in unicast mode) or unsolicited message (in broadcast
mode).
Broadcast Count Current number of unsolicited broadcast messages that have been received and processed
by the SNTP client since last reboot.
Multicast Count Current number of unsolicited multicast messages that have been received and processed by
the SNTP client since last reboot.
Format show sntp client
Mode Privileged EXEC
Term Definition
Client Supported
Modes
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports.
Port SNTP Client Port.
Client Mode Configured SNTP Client Mode.