Kontron AT8404 CLI - Manual (Page 5)

AT8404 Preface
Page v AT8404 CLI Reference Manual
Special Handling and Unpacking Instructions
Do not handle this product out of its protective enclosure while it is not used for operational purposes unless it is
otherwise protected.
Whenever possible, unpack or pack this product only at EOS/ESD safe work stations. Where a safe work station is
not guaranteed, it is important for the user to be electrically discharged before touching the product with his/her
hands or tools. This is most easily done by touching a metal part of your system housing.
It is particularly important to observe standard anti-static precautions when changing piggybacks, ROM devices,
jumper settings etc. If the product contains batteries for RTC or memory back-up, ensure that the board is not placed
on conductive surfaces, including anti-static plastics or sponges. They can cause short circuits and damage the
batteries or conductive circuits on the board.
General Instructions on Usage
In order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes
or modifications to the device, which are not explicitly approved by Kontron Modular Computers GmbH and
described in this manual or received from Kontron’s Technical Support as a special handling instruction, will void
your warranty.
This device should only be installed in or connected to systems that fulfill all necessary technical and specific
environmental requirements. This applies also to the operational temperature range of the specific board version,
which must not be exceeded. If batteries are present their temperature restrictions must be taken into account.
In performing all necessary installation and application operations, please follow only the instructions supplied by
the present manual.
Keep all the original packaging material for future storage or warranty shipments. If it is necessary to store or ship
the board please re-pack it as nearly as possible in the manner in which it was delivered.
Special care is necessary when handling or unpacking the product. Please, consult the special handling and
unpacking instruction on the previous page of this manual.
Two Year Warranty
Kontron Modular Computers GmbH grants the original purchaser of Kontron’s products a two year limited hardware
warranty as described in the following. However, no other warranties that may be granted or implied by anyone on
behalf of Kontron are valid unless the consumer has the express written consent of Kontron Modular Computers
GmbH.
Caution, Electric Shock!
Indicates that you must enter a value in place of the brackets and text inside them. Before
installing your new Kontron product into a system always ensure that your mains power is
switched off. This applies also to the installation of piggybacks.
Serious electrical shock hazards can exist during all installation, repair and maintenance oper-
ations with this product. Therefore, always unplug the power cable and any other cables which
provide external voltages before performing work.
ESD Sensitive Device!
Electronic boards and their components are sensitive to static electricity. Therefore, care must
be taken during all handling operations and inspections of this product, in order to ensure prod-
uct integrity at all times.