Kontron AT8404 CLI - Manual (Page 216)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 2
4. Utility Commands
This chapter describes the utility commands available in the FASTPATH CLI.
The Utility Commands chapter includes the following sections:
• 4.1 “Commands for update and startup Configuration“ on page 4 - 2
• 4.2 “Dual Image Commands“ on page 4 - 3
• 4.3 “ATCA commands“ on page 4 - 3
• 4.4 “System Information and Statistics Commands“ on page 4 - 5
• 4.5 “Logging Commands“ on page 4 - 20
• 4.6 “System Utility and Clear Commands“ on page 4 - 25
• 4.7 “Simple Network Time Protocol (SNTP) Commands“ on page 4 - 32
• 4.8 “DHCP Server Commands“ on page 4 - 35
• 4.9 “DHCP Filtering“ on page 4 - 45
• 4.10 “DNS Client Commands“ on page 4 - 46
• 4.11 “Serviceability Packet Tracing Commands“ on page 4 - 50
• 4.12 “Cable Test Command“ on page 4 - 58
• 4.13 “sFlow Commands“ on page 4 - 59
4.1 Commands for update and startup Configuration
The following commands are implemented to manipulate the Software images and configurations of the AT8404.
4.1.1 download ipmifw
This command updates the IPMI firmware using a HPM.1 firmware image. It downloads an IPMI firmware image
from URL and flashes the IPMC. The command is also used for updates of AMC (see section below). If the flash
process is interrupted or fails, the IPMC will automatically recover and use the previously installed image.
4.1.2 download amcipmifw
This command updates the IPMI firmware on an AMC with a Kontron OEM firmware image. For download a HPM.1
firmware image use command “download ipmifw” (see above). It downloads an IPMI firmware image from URL and
flashes the MMC on the AMC with the new image. If the flash process is interrupted or fails, the MMC will
automatically recover and use the previously installed image
Note: The commands in this chapter are in one of four functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every configuration
command, there is a show command that displays the configuration setting.
• Copy commands transfer or save configuration and informational files to and from the switch.
• Clear commands clear some or all of the settings to factory defaults.
Format download ipmifw
Mode Priviledged EXEC
Format download amcipmifw