Kontron AT8404 CLI - Manual (Page 166)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 130
2.26 MAC Database Commands
This section describes the commands you use to configure and view information about the MAC databases.
2.26.1 bridge aging-time
This command configures the forwarding database address aging timeout in seconds. The parameter
must be within the range of 10 to 1,000,000 seconds.
2.26.1.1 no bridge aging-time
This command sets the forwarding database address aging timeout to the default value.
2.26.2 show forwardingdb agetime
This command displays the timeout for address aging. In an IVL system, the [fdbid | all] parameter is required.
Min TCP Hdr Size
<0-255>
The factory default is 20.
TCP Fragment
Mode
May be enabled or disabled. The factory default is disabled.
TCP Flag Mode May be enabled or disabled. The factory default is disabled.
L4 Port Mode May be enabled or disabled. The factory default is disabled.
ICMP Mode May be enabled or disabled. The factory default is disabled.
Max ICMP Pkt Size
<0-1023>
The factory default is 512.
Default 300
Format bridge aging-time <10-1,000,000>
Mode Global Config
Format no bridge aging-time
Mode Global Config
Default all
Format show forwardingdb agetime [fdbid | all]
Mode Privileged EXEC
Term Definition
Forwarding DB ID Fdbid (Forwarding database ID) indicates the forwarding database whose aging timeout is to
be shown. The all option is used to display the aging timeouts associated with all forwarding
databases. This field displays the forwarding database ID in an IVL system.
Agetime • In an IVL system, this parameter displays the address aging timeout for the associated
forwarding database.
•
Term Definition