Kontron AT8404 CLI - Manual (Page 289)

AT8404 Management Commands
Page 5 - 13 AT8404 CLI Reference Manual
5.5 Management Security Commands
This section describes commands you use to generate keys and certificates, which you can do in addition to loading
them as before.
5.5.1 crypto certificate generate
Use this command to generate self-signed certificate for HTTPS. The generate RSA key for SSL has a length of
1024 bits. The resulting certificate is generated with a common name equal to the lowest IP address of the device
and a duration of 365 days.
5.5.1.1 no crypto certificate generate
Use this command to delete the HTTPS certificate files from the device, regardless of whether they are self-signed
or downloaded from an outside source.
5.5.2 crypto key generate rsa
Use this command to generate an RSA key pair for SSH. The new key files will overwrite any existing generated or
downloaded RSA key files.
5.5.2.1 no crypto key generate rsa
Use this command to delete the RSA key files from the device.
Term Definition
Administrative
Mode
This field indicates whether the administrative mode of SSH is enabled or disabled.
Protocol Level The protocol level may have the values of version 1, version 2 or both versions 1 and version
2.
SSH Sessions
Currently Active
The number of SSH sessions currently active.
Max SSH Sessions
Allowed
The maximum number of SSH sessions allowed.
SSH Timeout The SSH timeout value in minutes.
Keys Present Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation in
Progress
Indicates whether RSA or DSA key files generation is currently in progress.
Format crypto certificate generate
Mode Global Config
Format no crypto certificate generate
Mode Global Config
Format crypto key generate rsa
Mode Global Config
Format no crypto key generate rsa
Mode Global Config