Kontron AT8404 CLI - Manual (Page 314)

Management Commands AT8404
AT8404 CLI Reference Manual Page 5 - 38
Example: The following shows example CLI display output for the command.
(Switch) #show radius servers
Cur Host Address Server Name Port Type
rent
---- ------------------------ --------------------------------- ----- ----------
* 192.168.37.200 Network1_RADIUS_Server 1813 Primary
192.168.37.201 Network2_RADIUS_Server 1813 Secondary
192.168.37.202 Network3_RADIUS_Server 1813 Primary
192.168.37.203 Network4_RADIUS_Server 1813 Secondary
(Switch) #show radius servers name
Current Host Address Server Name Type
------------------------ --------------------------------- ----------192.168.37.200
Network1_RADIUS_Server Secondary
192.168.37.201 Network2_RADIUS_Server Primary
192.168.37.202 Network3_RADIUS_Server Secondary
192.168.37.203 Network4_RADIUS_Server Primary
(Switch) #show radius servers name Default_RADIUS_Server
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.58
Secret Configured...................... No
Message Authenticator ................. Enable
Number of Retransmits.................. 4
Time Duration.......................... 10
RADIUS Accounting Mode................. Disable
RADIUS Attribute 4 Mode................ Enable
RADIUS Attribute 4 Value .............. 192.168.37.60
(Switch) #show radius servers 192.168.37.58
Server Name............................ Default_RADIUS_Server
Host Address........................... 192.168.37.58
Server Name The name of the authenticating server.
Port The port used for communication with the authenticating server.
Type Specifies whether this server is a primary or secondary type.
Current Host
Address
The IP address of the currently active authenticating server.
Secret Configured Yes or No Boolean value that indicates whether this server is configured with a secret.
Number of
Retransmits
The configured value of the maximum number of times a request packet is retransmitted.
Message
Authenticator
A global parameter to indicate whether the Message Authenticator attribute is enabled or
disabled.
Time Duration The configured timeout value, in seconds, for request retransmissions.
RADIUS
Accounting Mode
A global parameter to indicate whether the accounting mode for all the servers is enabled or
not.
RADIUS Attribute 4
Mode
A global parameter to indicate whether the NAS-IP-Address attribute has been enabled to use
in RADIUS requests.
RADIUS Attribute 4
Value
A global parameter that specifies the IP address to be used in NAS-IP-Address attribute used
in RADIUS requests.
Field Description