Kontron AT8404 CLI - Manual (Page 44)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 8
2.2.2 spanning-tree bpdufilter
Use this command to enable BPDU Filter on the interface.
2.2.2.1 no spanning-tree bpdufilter
Use this command to disable BPDU Filter on the interface.
2.2.3 spanning-tree bpdufilter default
Use this command to enable BPDU Filter on all the edge port interfaces.
2.2.3.1 no spanning-tree bpdufilter default
Use this command to disable BPDU Filter on all the edge port interfaces.
2.2.4 spanning-tree bpduflood
Use this command to enable BPDU Flood on the interface.
2.2.4.1 no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface.
Default disabled
Format spanning-tree bpdufilter
Mode Interface Config
Default disabled
Format no spanning-tree bpdufilter
Mode Interface Config
Default disabled
Format spanning-tree bpdufilter
Mode Global Config
Default disabled
Format no spanning-tree bpdufilter default
Mode Global Config
Default disabled
Format spanning-tree bpduflood
Mode Interface Config
Default disabled
Format no spanning-tree bpduflood
Mode Interface Config