Kontron AT8404 CLI - Manual (Page 60)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 24
With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
2.3.10.1 no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All mode, untagged frames
or priority frames received on this interface are accepted and assigned the value of the interface VLAN ID for this
port. With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN
Specification.
2.3.11 vlan port ingressfilter all
This command enables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs
that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are
members of that VLAN.
2.3.11.1 no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs
that do not match the VLAN membership of the receiving interface are admitted and forwarded to ports that are
members of that VLAN.
2.3.12 vlan port pvid all
This command changes the VLAN ID for all interface.
2.3.12.1 no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
Format no vlan port acceptframe all
Mode Global Config
Default disabled
Format vlan port ingressfilter all
Mode Global Config
Format no vlan port ingressfilter all
Mode Global Config
Default 1
Format vlan port pvid all <1-4094>
Mode Global Config
Format no vlan port pvid all
Mode Global Config