Kontron AT8404 CLI - Manual (Page 338)

AT8404 FASTPATH log messages
Page B - 5 AT8404 CLI Reference Manual
B.3 Management
RADIUS RADIUS: Access-Challenge failed to validate,
id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Failed to validate Message-
Authenticator, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Access-Accpet failed to validate,
id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Invalid packet length – xxx The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Response is missing Message-
Authenticator, id=xxx
The RADIUS Client received an invalid
message from the server.
RADIUS RADIUS: Server address doesn't match
configured server
RADIUS Client received a server response
from an unconfigured server.
Table 8: TACACS+ Log Messages
Component Message Cause
TACACS+ TACACS+: authentication error, no server to
contact
TACACS+ request needed, but no servers are
configured.
TACACS+ TACACS+: connection failed to server x.x.x.x TACACS+ request sent to server x.x.x.x but
no response was received.
TACACS+ TACACS+: no key configured to encrypt
packet for server x.x.x.x
No key configured for the specified server.
TACACS+ TACACS+: received invalid packet type from
server.
Received packet type that is not supported.
TACACS+ TACACS+: invalid major version in received
packet.
Major version mismatch.
TACACS+ TACACS+: invalid minor version in received
packet.
Minor version mismatch.
Table 9: LLDP Log Message
Component Message Cause
LLDP lldpTask(): invalid message type:xx. xxxxxx:xx Unsupported LLDP packet received.
Table 10: SNTP Log Message
Component Message Cause
SNTP SNTP: system clock synchronized on %s UTC Indicates that SNTP has successfully
synchronized the time of the box with the
server.
Table 11: SNMP Log Message
Component Message Cause
SNMP EDB Callback: Unit Join: x. A new unit has joined the stack.
Table 7: RADIUS Log Messages (Continued)
Component Message Cause