Kontron AT8404 CLI - Manual (Page 126)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 90
2.17.6 ip arp inspection filter
Use this command to configure the ARP ACL used to filter invalid ARP packets on a list of comma-separated VLAN
ranges. If the static keyword is given, packets that do not match a permit statement are dropped without consulting
the DHCP snooping bindings.
2.17.6.1 no ip arp inspection filter
Use this command to unconfigure the ARP ACL used to filter invalid ARP packets on a list of comma-separated
VLAN ranges.
2.17.7 arp access-list
Use this command to create an ARP ACL.
2.17.7.1 no arp access-list
Use this command to delete a configured ARP ACL.
2.17.8 permit ip host mac host
Use this command to configure a rule for a valid IP address and MAC address combination used in ARP packet
validation.
2.17.8.1 no permit ip host mac host
Use this command to delete a rule for a valid IP and MAC combination.
Default No ARP ACL is configured on a VLAN
Format ip arp inspection filter acl-name vlan vlan-list [static]
Mode Global Config
Format no ip arp inspection filter acl-name vlan vlan-list [static]
Mode Global Config
Format arp access-list acl-name
Mode Global Config
Format no arp access-list acl-name
Mode Global Config
Format permit ip host sender-ip mac host sender-mac
Mode ARP Access-list Config
Format no permit ip host sender-ip mac host sender-mac
Mode ARP Access-list Config