beautypg.com

17 debug spanning-tree bpdu receive, 1 no debug spanning-tree bpdu receive, 18 debug spanning-tree bpdu transmit – Kontron AT8404 CLI User Manual

Page 271: At8404 utility commands

background image

AT8404

Utility Commands

Page 4 - 57

AT8404 CLI Reference Manual

4.11.17

debug spanning-tree bpdu receive

This command enables tracing of spanning tree BPDUs received by the switch. Spanning tree should be enabled
on the device and on the interface in order to monitor packets for a particular interface.

A sample output of the trace message is shown below.

<15> JAN 01 01:02:04 192.168.17.29-1 DOT1S[191096896]: dot1s_debug.c(1249) 101 % Pkt
RX - Intf: 1/0/9(9), Source_Mac: 00:11:88:4e:c2:10 Version: 3, Root Mac:
00:11:88:4e:c2:00, Root Priority: 0x8000 Path Cost: 0

The following parameters are displayed in the trace message:

4.11.17.1

no debug spanning-tree bpdu receive

This command disables tracing of received spanning tree BPDUs.

4.11.18

debug spanning-tree bpdu transmit

This command enables tracing of spanning tree BPDUs transmitted by the switch. Spanning tree should be enabled
on the device and on the interface in order to monitor packets on a particular interface.

A sample output of the trace message is shown below.

<15> JAN 01 01:02:04 192.168.17.29-1 DOT1S[191096896]: dot1s_debug.c(1249) 101 % Pkt
TX - Intf: 1/0/7(7), Source_Mac: 00:11:88:4e:c2:00 Version: 3, Root_Mac:
00:11:88:4e:c2:00, Root_Priority: 0x8000 Path_Cost: 0

Default

disabled

Format

debug spanning-tree bpdu receive

Mode

Privileged EXEC

Parameter

Definition

RX

A packet received by the device.

Intf

The interface that the packet came in on. Format used is unit/port/slot (internal interface

number). Unit is always shown as 1 for interfaces on a non-stacking device.

Source_Mac

Source MAC address of the packet.

Version

Spanning tree protocol version (0-3). 0 refers to STP, 2 RSTP and 3 MSTP.

Root_Mac

MAC address of the CIST root bridge.

Root_Priority

Priority of the CIST root bridge. The value is between 0 and 61440. It is displayed in hex in

multiples of 4096.

Path_Cost

External root path cost component of the BPDU.

Format

no debug spanning-tree bpdu receive

Mode

Privileged EXEC

Default

disabled

Format

debug spanning-tree bpdu transmit

Mode

Privileged EXEC