1 class-map, 1 no class-map, 2 class-map rename – Kontron AT8404 CLI User Manual
Page 184: 3 match ethertype, Class-map - 10, Class-map rename - 10, Match ethertype - 10, Quality of service (qos) commands at8404
Quality of Service (QoS) Commands
AT8404
AT8404 CLI Reference Manual
Page 3 - 10
3.3.1
class-map
This command defines a DiffServ class of type match-all. When used without any match condition, this command
enters the class-map mode. The
characters uniquely identifying an existing DiffServ class.
The class type of match-all indicates all of the individual match conditions must be true for a packet to be
considered a member of the class.This command may be used without specifying a class type to enter the Class-
Map Config mode for an existing DiffServ class.
3.3.1.1
no class-map
This command eliminates an existing DiffServ class. The
class (The class name ‘default’ is reserved and is not allowed here). This command may be issued at any time; if
the class is currently referenced by one or more policies or by any other class, the delete action fails.
3.3.2
class-map rename
This command changes the name of a DiffServ class. The
class. The
uniquely identifying the class.
3.3.3
match ethertype
This command adds to the specified class definition a match condition based on the value of the ethertype. The
Note: The class-map-name 'default' is reserved and must not be used.
Note: The optional keywords [{ipv4 | ipv6}] specify the Layer 3 protocol for this class. If not
specified, this parameter defaults to ‘ipv4’. This maintains backward compatibility for configurations
defined on systems before IPv6 match items were supported.
Note: The CLI mode is changed to Class-Map Config or Ipv6-Class-Map Config when this command is
successfully executed depending on the [{ipv4 | ipv6}] keyword specified.
Format
class-map match-all
Mode
Global Config
Format
no class-map
Mode
Global Config
Default
none
Format
class-map rename
Mode
Global Config