Kontron AT8404 CLI - Manual (Page 319)

AT8404 Management Commands
Page 5 - 43 AT8404 CLI Reference Manual
5.10.1.1 no tacacs-server host
Use the no tacacs-server host command to delete the specified hostname or IP address. The address|hostname> parameter is the IP address of the TACACS+ server.
5.10.2 tacacs-server key
Use the tacacs-server key command to set the authentication and encryption key for all TACACS+
communications between the switch and the TACACS+ daemon. The parameter has a range of 0
- 128 characters and specifies the authentication and encryption key for all TACACS communications between the
switch and the TACACS+ server. This key must match the key used on the TACACS+ daemon.
Text-based configuration supports TACACS server’s secrets in encrypted and non-encrypted format. When you
save the configuration, these secret keys are stored in encrypted format only. If you want to enter the key in
encrypted format, enter the key along with the encrypted keyword. In the show running config command’s display,
these secret keys are displayed in encrypted format. You cannot show these keys in plain text format.
5.10.2.1 no tacacs-server key
Use the no tacacs-server key command to disable the authentication and encryption key for all TACACS+
communications between the switch and the TACACS+ daemon. The parameter has a range of 0
- 128 characters This key must match the key used on the TACACS+ daemon.
5.10.3 tacacs-server timeout
Use the tacacs-server timeout command to set the timeout value for communication with the TACACS+
servers. The parameter has a range of 1-30 and is the timeout value in seconds.
5.10.3.1 no tacacs-server timeout
Use the no tacacs-server timeout command to restore the default timeout value for all TACACS servers.
Mode Global Config
Format no tacacs-server host
Mode Global Config
Format tacacs-server key
[
| encrypted ]
Mode Global Config
Format no tacacs-server key
Mode Global Config
Default 5
Format tacacs-server timeout
Mode Global Config
Format no tacacs-server timeout
Mode Global Config