5 session-limit, 1 no session-limit, 6 session-timeout – Kontron AT8404 CLI User Manual
Page 285: 1 no session-timeout, 7 telnetcon maxsessions, 1 no telnetcon maxsessions, Session-limit - 9, Session-timeout - 9, Telnetcon maxsessions - 9, At8404 management commands
AT8404
Management Commands
Page 5 - 9
AT8404 CLI Reference Manual
5.3.5
session-limit
This command specifies the maximum number of simultaneous outbound Telnet sessions. A value of 0 indicates
that no outbound Telnet session can be established.
5.3.5.1
no session-limit
This command sets the maximum number of simultaneous outbound Telnet sessions to the default value.
5.3.6
session-timeout
This command sets the Telnet session timeout value.The timeout value unit of time is minutes.
5.3.6.1
no session-timeout
This command sets the Telnet session timeout value to the default. The timeout value unit of time is minutes.
5.3.7
telnetcon maxsessions
This command specifies the maximum number of Telnet connection sessions that can be established. A value of 0
indicates that no Telnet connection can be established. The range is 0-5.
5.3.7.1
no telnetcon maxsessions
This command sets the maximum number of Telnet connection sessions that can be established to the default value.
Default
5
Format
session-limit <0-5>
Mode
Line Config
Format
no session-limit
Mode
Line Config
Default
5
Format
session-timeout <1-160>
Mode
Line Config
Format
no session-timeout
Mode
Line Config
Default
5
Format
telnetcon maxsessions <0-5>
Mode
Privileged EXEC
Format
no telnetcon maxsessions
Mode
Privileged EXEC