Kontron AT8404 CLI - Manual (Page 192)

Quality of Service (QoS) Commands AT8404
AT8404 CLI Reference Manual Page 3 - 18
3.4.4 redirect
This command specifies that all incoming packets for the associated traffic stream are redirected to a specific egress
interface (physical port or port-channel).
3.4.5 conform-color
Use this command to enable color-aware traffic policing and define the conform-color class map. Used in
conjunction with the police command where the fields for the conform level are specified. The
parameter is the name of an existing DiffServ class map.
3.4.6 class
This command creates an instance of a class definition within the specified policy for the purpose of defining
treatment of the traffic class through subsequent policy attribute statements. The is the name of an
existing DiffServ class.
Format mirror
Mode Policy-Class-Map Config
Incompatibilities Drop, Redirect
Note: This command is not available on the Broadcom 5630x platform.
Format redirect
Mode Policy-Class-Map Config
Incompatibilities Drop, Mirror
Note: This command may only be used after specifying a police command for the policy-class instance.
Format conform-color
Mode Policy-Class-Map Config
Note: This command causes the specified policy to create a reference to the class definition.
Note: The CLI mode is changed to Policy-Class-Map Config when this command is successfully
executed.
Format class
Mode Policy-Map Config