Kontron AT8404 CLI - Manual (Page 151)

AT8404 Switching Commands
Page 2 - 115 AT8404 CLI Reference Manual
the system capabilities TLV. Use port-desc to transmit the port description TLV. To configure the port description,
see 2.1.7 “description“on page 2 - 4.
2.23.4.1 no lldp transmit-tlv
Use this command to remove an optional TLV from the LLDPDUs. Use the command without parameters to remove
all optional TLVs from the LLDPDU.
2.23.5 lldp transmit-mgmt
Use this command to include transmission of the local system management address information in the LLDPDUs.
2.23.5.1 no lldp transmit-mgmt
Use this command to include transmission of the local system management address information in the LLDPDUs.
Use this command to cancel inclusion of the management information in LLDPDUs.
2.23.6 lldp notification
Use this command to enable remote data change notifications.
2.23.6.1 no lldp notification
Use this command to disable notifications.
Default no optional TLVs are included
Format lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config
Format no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Mode Interface Config
Format lldp transmit-mgmt
Mode Interface Config
Format no lldp transmit-mgmt
Mode Interface Config
Default disabled
Format lldp notification
Mode Interface Config
Default disabled
Format no lldp notification
Mode Interface Config