Kontron AT8404 CLI - Manual (Page 62)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 26
2.3.16 vlan protocol group remove
This command removes the protocol-based VLAN group that is identified by this .
2.3.17 protocol group
This command attaches a to the protocol-based VLAN identified by . A group may only be
associated with one VLAN at a time, however the VLAN association can be changed.
2.3.17.1 no protocol group
This command removes the from this protocol-based VLAN group that is identified by this .
2.3.18 protocol vlan group
This command adds the physical interface to the protocol-based VLAN identified by . You can associate
multiple interfaces with a group, but you can only associate each interface and protocol combination with one group.
If adding an interface to a group causes any conflicts with protocols currently associated with the group, this
command fails and the interface(s) are not added to the group.
2.3.18.1 no protocol vlan group
This command removes the interface from this protocol-based VLAN group that is identified by this .
2.3.19 protocol vlan group all
This command adds all physical interfaces to the protocol-based VLAN identified by . You can associate
multiple interfaces with a group, but you can only associate each interface and protocol combination with one group.
If adding an interface to a group causes any conflicts with protocols currently associated with the group, this
command will fail and the interface(s) will not be added to the group.
Format vlan protocol group remove
Mode Global Config
Default none
Format protocol group
Mode VLAN Config
Format no protocol group
Mode VLAN Config
Default none
Format protocol vlan group
Mode Interface Config
Format no protocol vlan group
Mode Interface Config
Default none