Kontron AT8404 CLI - Manual (Page 282)

Management Commands AT8404
AT8404 CLI Reference Manual Page 5 - 6
5.2.1 configuration
This command gives you access to the Global Config mode. From the Global Config mode, you can configure a
variety of system settings, including user accounts. From the Global Config mode, you can enter other command
modes, including Line Config mode.
5.2.2 lineconfig
This command gives you access to the Line Config mode, which allows you to configure various Telnet settings and
the console port.
5.2.3 serial baudrate
This command specifies the communication rate of the terminal interface. The supported rates are 1200, 2400,
4800, 9600, 19200, 38400, 57600, 115200.
5.2.3.1 no serial baudrate
This command sets the communication rate of the terminal interface.
5.2.4 serial timeout
This command specifies the maximum connect time (in minutes) without console activity. A value of 0 indicates that
a console can be connected indefinitely. The time range is 0 to 160.
5.2.4.1 no serial timeout
This command sets the maximum connect time (in minutes) without console activity.
Format configuration
Mode Privileged EXEC
Format lineconfig
Mode Global Config
Default 9600
Format serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 |
115200}
Mode Line Config
Format no serial baudrate
Mode Line Config
Default 5
Format serial timeout <0-160>
Mode Line Config
Format no serial timeout
Mode Line Config