Kontron AT8404 CLI - Manual (Page 65)

AT8404 Switching Commands
Page 2 - 29 AT8404 CLI Reference Manual
2.3.25 show vlan brief
This command displays a list of all configured VLANs.
2.3.26 show vlan port
This command displays VLAN port information.
Configured The configured degree of participation of this port in this VLAN. The permissible values are:
• Include - This port is always a member of this VLAN. This is equivalent to registration fixed
in the IEEE 802.1Q standard.
• Exclude - This port is never a member of this VLAN. This is equivalent to registration
forbidden in the IEEE 802.1Q standard.
• Autodetect - To allow the port to be dynamically registered in this VLAN via GVRP. The
port will not participate in this VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Tagging The tagging behavior for this port in this VLAN.
• Tagged - Transmit traffic for this VLAN as tagged frames.
• Untagged - Transmit traffic for this VLAN as untagged frames.
Format show vlan brief
Mode • Privileged EXEC
• User EXEC
Term Definition
VLAN ID There is a VLAN Identifier (vlanid) associated with each VLAN. The range of the VLAN ID is
1 to 4094.
VLAN Name A string associated with this VLAN as a convenience. It can be up to 32 alphanumeric
characters long, including blanks. The default is blank. VLAN ID 1 always has a name of
“Default.” This field is optional.
VLAN Type Type of VLAN, which can be Default (VLAN ID = 1) or static (one that is configured and
permanently defined), or a Dynamic (one that is created by GVRP registration).
Format show vlan port { | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface Valid slot and port number separated by a forward slash. It is possible to set the parameters
for all ports by using the selectors on the top line.
Port VLAN ID The VLAN ID that this port will assign to untagged frames or priority tagged frames received
on this port. The value must be for an existing VLAN. The factory default is 1.
Acceptable Frame
Types
The types of frames that may be received on this port. The options are 'VLAN only' and 'Admit
All'. When set to 'VLAN only', untagged frames or priority tagged frames received on this port
are discarded. When set to 'Admit All', untagged frames or priority tagged frames received on
this port are accepted and assigned the value of the Port VLAN ID for this port. With either
option, VLAN tagged frames are forwarded in accordance to the 802.1Q VLAN specification.
Term Definition