Kontron AT8404 CLI - Manual (Page 157)

AT8404 Switching Commands
Page 2 - 121 AT8404 CLI Reference Manual
2.24.1.1 no lldp med
Use this command to disable MED.
2.24.2 lldp med confignotification
Use this command to configure all the ports to send the topology change notification.
2.24.2.1 no ldp med confignotification
Use this command to disable notifications.
2.24.3 lldp med transmit-tlv
Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED set will be transmitted in
the Link Layer Discovery Protocol Data Units (LLDPDUs).
2.24.3.1 no lldp med transmit-tlv
Use this command to remove a TLV.
Format no lldp med
Mode Interface Config
Default disabled
Format lldp med confignotification
Mode Interface Config
Format no lldp med confignotification
Mode Interface Config
Default By default, the capabilities and network policy TLVs are included.
Format lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory]
[location] [network-policy]
Mode Interface Config
Term Definition
capabilities Transmit the LLDP capabilities TLV.
ex-pd Transmit the LLDP extended PD TLV.
ex-pse Transmit the LLDP extended PSE TLV.
inventory Transmit the LLDP inventory TLV.
location Transmit the LLDP location TLV.
network-policy Transmit the LLDP network policy TLV.
Format no lldp med transmit-tlv [capabilities] [network-policy] [ex-pse] [ex-
pd] [location] [inventory]
Mode Interface Config