4 sntp unicast client poll-interval, 1 no sntp unicast client poll-interval, 5 sntp unicast client poll-timeout – Kontron AT8404 CLI User Manual
Page 247: 1 no sntp unicast client poll-timeout, 6 sntp unicast client poll-retry, 1 no sntp unicast client poll-retry, Sntp unicast client poll-interval - 33, Sntp unicast client poll-timeout - 33, Sntp unicast client poll-retry - 33, At8404 utility commands
AT8404
Utility Commands
Page 4 - 33
AT8404 CLI Reference Manual
4.7.4
sntp unicast client poll-interval
This command sets the poll interval for SNTP unicast clients in seconds as a power of two where
4.7.4.1
no sntp unicast client poll-interval
This command resets the poll interval for SNTP unicast clients to its default value.
4.7.5
sntp unicast client poll-timeout
This command will set the poll timeout for SNTP unicast clients in seconds to a value from 1-30.
4.7.5.1
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
4.7.6
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
4.7.6.1
no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
Mode
Global Config
Default
6
Format
sntp unicast client poll-interval
Mode
Global Config
Format
no sntp unicast client poll-interval
Mode
Global Config
Default
5
Format
sntp unicast client poll-timeout
Mode
Global Config
Format
no sntp unicast client poll-timeout
Mode
Global Config
Default
1
Format
sntp unicast client poll-retry
Mode
Global Config
Format
no sntp unicast client poll-retry
Mode
Global Config