Kontron AT8404 CLI - Manual (Page 264)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 50
Configured host name-to-address mapping:
Host Addresses
------------------------------ ------------------------------
accounting.gm.com 176.16.8.8
Host Total Elapsed Type Addresses
--------------- -------- ------ -------- --------------
www.stanford.edu 72 3 IP
171.64.14.203
4.11 Serviceability Packet Tracing Commands
These commands improve the capability of network engineers to diagnose conditions affecting their FASTPATH
product.
4.11.1 debug arp
Use this command to enable ARP debug protocol messages.
4.11.1.1 no debug arp
Use this command to disable ARP debug protocol messages.
4.11.2 debug auto-voip
Use this command to enable Auto VOIP debug messages. Use the optional parameters to trace H323, SCCP, or
SIP packets respectively.
4.11.2.1 no debug auto-voip
Use this command to disable Auto VOIP debug messages.
Caution! The output of “debug” commands can be long and may adversely affect system performance.
Default disabled
Format debug arp
Mode Privileged EXEC
Format no debug arp
Mode Privileged EXEC
Default disabled
Format debug auto-voip [H323|SCCP|SIP]
Mode Privileged EXEC
Format no debug auto-voip
Mode Privileged EXEC