Kontron AT8404 CLI - Manual (Page 142)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 106
2.20.7.1 no set mld mrouter
Use this command to disable multicast router attached mode for a VLAN with a particular VLAN ID.
2.20.8 set mld mrouter interface
Use this command to configure the interface as a multicast router-attached interface. When configured as a
multicast router interface, the interface is treated as a multicast router-attached interface in all VLANs.
2.20.8.1 no set mld mrouter interface
Use this command to disable the status of the interface as a statically configured multicast router-attached interface.
2.20.9 show mldsnooping
Use this command to display MLD Snooping information. Configured information is displayed whether or not MLD
Snooping is enabled.
When the optional arguments or are not used, the command displays the following
information.
When you specify the values, the following information displays.
Format no set mld mrouter
Mode Interface Config
Default disabled
Format set mld mrouter interface
Mode Interface Config
Format no set mld mrouter interface
Mode Interface Config
Format show mldsnooping [ | ]
Mode Privileged EXEC
Term Definition
Admin Mode Indicates whether or not MLD Snooping is active on the switch.
Interfaces Enabled
for MLD Snooping
Interfaces on which MLD Snooping is enabled.
MLD Control
Frame Count
Displays the number of MLD Control frames that are processed by the CPU.
VLANs Enabled for
MLD Snooping
VLANs on which MLD Snooping is enabled.
Term Definition
MLD Snooping
Admin Mode
Indicates whether MLD Snooping is active on the interface.
Fast Leave Mode Indicates whether MLD Snooping Fast Leave is active on the VLAN.