Kontron AT8404 CLI - Manual (Page 254)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 40
• h-node—Hybrid (recommended)
4.8.13.1 no netbios-node-type
This command removes the NetBIOS node Type.
4.8.14 next-server
This command configures the next server in the boot process of a DHCP client.The
4.8.14.1 no next-server
This command removes the boot server list.
4.8.15 option
The option command configures DHCP Server options. The <code> parameter specifies the DHCP option code
and ranges from 1-254. The parameter specifies an NVT ASCII character string. ASCII character
strings that contain white space must be delimited by quotation marks. The hex parameter specifies
hexadecimal data. In hexadecimal, character strings are two hexadecimal digits. You can separate each byte by a
period (for example, a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22
0c).
4.8.15.1 no option
This command removes the DHCP Server options. The <code> parameter specifies the DHCP option code.
Default none
Format netbios-node-type
Mode DHCP Pool Config
Format no netbios-node-type
Mode DHCP Pool Config
Default inbound interface helper addresses
Format next-server
Mode DHCP Pool Config
Format no next-server
Mode DHCP Pool Config
Default none
Format option {ascii string | hex [...] | ip
[...]}
Mode DHCP Pool Config
Format no option
Mode DHCP Pool Config