Kontron AT8404 CLI - Manual (Page 194)

Quality of Service (QoS) Commands AT8404
AT8404 CLI Reference Manual Page 3 - 20
3.4.9 police-simple
This command is used to establish the traffic policing style for the specified class. The simple form of the police
command uses a single data rate and burst size, resulting in two outcomes: conform and violate. The conforming
data rate is specified in kilobits-per-second (Kbps) and is an integer from 1 to 4294967295. The conforming burst
size is specified in kilobytes (KB) and is an integer from 1 to 128.
For each outcome, the only possible actions are drop, set-cos-transmit, set-dscp-transmit, set-prec-transmit, or
transmit. In this simple form of the police command, the conform action defaults to transmit and the violate action
defaults to drop.
For set-dscp-transmit, a value is required and is specified as either an integer from 0 to 63, or
symbolically through one of the following keywords: af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42,
af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef.
For set-prec-transmit, an IP Precedence value is required and is specified as an integer from 0-7.
For set-cos-transmit an 802.1p priority value is required and is specified as an integer from 0-7.
3.4.10 policy-map
This command establishes a new DiffServ policy. The parameter is a case-sensitive alphanumeric
string from 1 to 31 characters uniquely identifying the policy. The type of policy is specific to the inbound traffic
direction as indicated by the in parameter.
3.4.10.1 no policy-map
This command eliminates an existing DiffServ policy. The parameter is the name of an existing
DiffServ policy. This command may be issued at any time. If the policy is currently referenced by one or more
interface service attachments, this delete attempt fails.
Format police-simple {<1-4294967295> <1-128> conform-action {drop | set-
prec-transmit <0-7> | set-dscp-transmit <0-63> | set-cos-transmit <0-
7> | transmit} [violate-action {drop | set-prec-transmit <0-7> | set-
dscp-transmit <0-63> | set-cos-transmit <0-7> | transmit}]}
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark (all forms)
Note: The CLI mode is changed to Policy-Map Config when this command is successfully executed.
Format policy-map in
Mode Global Config
Format no policy-map
Mode Global Config