Kontron AT8404 CLI - Manual (Page 318)

Management Commands AT8404
AT8404 CLI Reference Manual Page 5 - 42
Example: The following shows example CLI display output for the command.
(Switch) #show radius statistics 192.168.37.200
RADIUS Server Name............................ Default_RADIUS_Server
Server Host Address........................... 192.168.37.200
Access Requests............................... 0.00
Access Retransmissions........................ 0
Access Accepts................................ 0
Access Rejects................................ 0
Access Challenges............................. 0
Malformed Access Responses.................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
(Switch) #show radius statistics name Default_RADIUS_Server
RADIUS Server Name............................ Default_RADIUS_Server
Server Host Address........................... 192.168.37.200
Access Requests............................... 0.00
Access Retransmissions........................ 0
Access Accepts................................ 0
Access Rejects................................ 0
Access Challenges............................. 0
Malformed Access Responses.................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
5.10 TACACS+ Commands
TACACS+ provides access control for networked devices via one or more centralized servers. Similar to RADIUS,
this protocol simplifies authentication by making use of a single database that can be shared by many clients on a
large network. TACACS+ is based on the TACACS protocol (described in RFC1492) but additionally provides for
separate authentication, authorization, and accounting services. The original protocol was UDP based with
messages passed in clear text over the network; TACACS+ uses TCP to ensure reliable delivery and a shared key
configured on the client and daemon server to encrypt all messages.
5.10.1 tacacs-server host
Use the tacacs-server host command in Global Configuration mode to configure a TACACS+ server. This
command enters into the TACACS+ configuration mode. The parameter is the IP
address or hostname of the TACACS+ server. To specify multiple hosts, multiple
tacacs-server host
commands can be used.
Packets Dropped The number of RADIUS packets received from this server on the authentication port and
dropped for some other reason.
Format tacacs-server host
Term Definition