1 no cos-queue min-bandwidth, 5 cos-queue strict, 1 no cos-queue strict – Kontron AT8404 CLI User Manual
Page 178: 6 traffic-shape, 1 no traffic-shape, 7 show classofservice dot1p-mapping, Cos-queue strict - 4, Traffic-shape - 4, Show classofservice dot1p-mapping - 4, Quality of service (qos) commands at8404
Quality of Service (QoS) Commands
AT8404
AT8404 CLI Reference Manual
Page 3 - 4
3.1.4.1
no cos-queue min-bandwidth
This command restores the default for each queue's minimum bandwidth value.
3.1.5
cos-queue strict
This command activates the strict priority scheduler mode for each specified queue.
3.1.5.1
no cos-queue strict
This command restores the default weighted scheduler mode for each specified queue.
3.1.6
traffic-shape
This command specifies the maximum transmission bandwidth limit for the interface as a whole. Also known as rate
shaping, traffic shaping has the effect of smoothing temporary traffic bursts over time so that the transmitted traffic
rate is bounded.
3.1.6.1
no traffic-shape
This command restores the interface shaping rate to the default value.
3.1.7
show classofservice dot1p-mapping
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes for a specific interface.
The
Format
cos-queue min-bandwidth
Modes
• Global Config
• Interface Config
Format
no cos-queue min-bandwidth
Modes
• Global Config
• Interface Config
Format
cos-queue strict
Modes
• Global Config
• Interface Config
Format
no cos-queue strict
Modes
• Global Config
• Interface Config
Format
traffic-shape
Modes
• Global Config
• Interface Config
Format
no traffic-shape
Modes
• Global Config
• Interface Config