Kontron AT8404 CLI - Manual (Page 262)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 48
4.10.4.1 no ip name server
Use this command to remove a name server.
4.10.5 ip host
Use this command to define static host name-to-address mapping in the host cache. <name> is host name. p
address> is the IP address of the host.
4.10.5.1 no ip host
Use this command to remove the name-to-address mapping.
4.10.6 ip domain retry
Use this command to specify the number of times to retry sending Domain Name System (DNS) queries. The
parameter <number> indicates the number of times to retry sending a DNS query to the DNS server. This number
ranges from 0 to 100.
4.10.6.1 no ip domain retry
Use this command to return to the default.
4.10.7 ip domain timeout
Use this command to specify the amount of time to wait for a response to a DNS query. The parameter <seconds>
specifies the time, in seconds, to wait for a response to a DNS query. <seconds> ranges from 0 to 3600.
Format no ip name-server [server-address1...server-address8]
Mode Global Config
Default none
Format ip host <name> <ipaddress>
Mode Global Config
Format no ip host <name>
Mode Global Config
Default 2
Format ip domain retry <number>
Mode Global Config
Format no ip domain retry <number>
Mode Global Config
Default 3
Format ip domain timeout <seconds>
Mode Global Config