Kontron AT8404 CLI - Manual (Page 260)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 46
4.9.2 ip dhcp filtering trust
This command configures an interface as trusted.
4.9.2.1 no ip dhcp filtering trust
This command returns an interface to the default value for DHCP filtering.
4.9.3 show ip dhcp filtering
This command displays the DHCP filtering configuration.
4.10 DNS Client Commands
These commands are used in the Domain Name System (DNS), an Internet directory service. DNS is how domain
names are translated into IP addresses. When enabled, the DNS client provides a hostname lookup service to other
components of FASTPATH.
4.10.1 ip domain lookup
Use this command to enable the DNS client.
4.10.1.1 no ip domain lookup
Use this command to disable the DNS client.
Default untrusted
Format ip dhcp filtering trust
Mode Interface Config
Format no ip dhcp filtering trust
Mode Interface Config
Format show ip dhcp filtering
Mode Privileged EXEC
Term Definition
Interface The interface by slot/port.
Trusted Indicates whether the interface is trusted or untrusted.
Default enabled
Format ip domain lookup
Mode Global Config
Format no ip domain lookup
Mode Global Config