Kontron AT8404 CLI - Manual (Page 63)

AT8404 Switching Commands
Page 2 - 27 AT8404 CLI Reference Manual
2.3.19.1 no protocol vlan group all
This command removes all interfaces from this protocol-based VLAN group that is identified by this .
2.3.20 vlan pvid
This command changes the VLAN ID per interface.
2.3.20.1 no vlan pvid
This command sets the VLAN ID per interface to 1.
2.3.21 vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If tagging is enabled,
traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a
valid VLAN identification number.
2.3.21.1 no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If tagging is disabled,
traffic is transmitted as untagged frames. The ID is a valid VLAN identification number.
2.3.22 vlan association subnet
This command associates a VLAN to a specific IP-subnet.
Format protocol vlan group all
Mode Global Config
Format no protocol vlan group all
Mode Global Config
Default 1
Format vlan pvid <1-4094>
Mode Interface Config
Format no vlan pvid
Mode Interface Config
Format vlan tagging <1-4094>
Mode Interface Config
Format no vlan tagging <1-4094>
Mode Interface Config
Format vlan association subnet
Mode VLAN Config