Kontron AT8404 CLI - Manual (Page 237)

AT8404 Utility Commands
Page 4 - 23 AT8404 CLI Reference Manual
4.5.10 show logging buffered
This command displays buffered logging (system startup and system operation logs).
4.5.11 show logging hosts
This command displays all configured logging hosts.
4.5.12 show logging traplogs
This command displays SNMP trap events and statistics.
Log Messages
Received
Number of messages received by the log process. This includes messages that are dropped
or ignored.
Log Messages
Dropped
Number of messages that could not be processed due to error or lack of resources.
Log Messages
Relayed
Number of messages sent to the collector/relay.
Format show logging buffered
Mode Privileged EXEC
Term Definition
Buffered (In-
Memory) Logging
Shows whether the In-Memory log is enabled or disabled.
Buffered Logging
Wrapping
Behavior
The behavior of the In Memory log when faced with a log full situation.
Buffered Log
Count
The count of valid entries in the buffered log.
Format show logging hosts
Mode Privileged EXEC
Term Definition
Host Index (Used for deleting hosts.)
IP Address /
Hostname
IP address or hostname of the logging host.
Severity Level The minimum severity to log to the specified address. The possible values are emergency (0),
alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7).
Port The server port number, which is the port on the local host from which syslog messages are
sent.
Host Status The state of logging to configured syslog hosts. If the status is disable, no logging occurs.
Format show logging traplogs
Mode Privileged EXEC
Term Definition