Kontron AT8404 CLI - Manual (Page 57)

AT8404 Switching Commands
Page 2 - 21 AT8404 CLI Reference Manual
2.3.2 network mgmt_vlan
This command configures the Management VLAN ID.
2.3.2.1 no network mgmt_vlan
This command sets the Management VLAN ID to the default.
2.3.3 vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification number (ID 1 is
reserved for the default VLAN). VLAN range is 2-4094.
2.3.3.1 no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is reserved for the
default VLAN). The VLAN range is 2-4094.
2.3.4 vlan acceptframe
This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged frames or priority
frames received on this interface are discarded. For Admit All mode, untagged frames or priority frames received on
this interface are accepted and assigned the value of the interface VLAN ID for this port. With either option, VLAN
tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
2.3.4.1 no vlan acceptframe
This command resets the frame acceptance mode for the interface to the default value.
Default 1
Format network mgmt_vlan <1-4069>
Mode Privileged EXEC
Format no network mgmt_vlan
Mode Privileged EXEC
Format vlan <2-4094>
Mode VLAN Config
Format no vlan <2-4094>
Mode VLAN Config
Default all
Format vlan acceptframe {vlanonly | all}
Mode Interface Config
Format no vlan acceptframe
Mode Interface Config