Kontron AT8404 CLI - Manual (Page 32)

Using the Command-Line Interface AT8404
AT8404 CLI Reference Manual Page 1 - 6
Table 6 explains how to enter or exit each mode.
MAC Access-list
Config
Switch (Config-mac-access-list)# Allows you to create a MAC Access-List and
to enter the mode containing MAC Access-
List configuration commands.
TACACS Config Switch (Tacacs)# Contains commands to configure properties
for the TACACS servers.
DHCP Pool
Config
Switch (Config dhcp-pool)# Contains the DHCP server IP address pool
configuration commands.
Table 6: CLI Mode Access and Exit
Command Mode Access Method Exit or Access Previous Mode
User EXEC This is the first level of access. To exit, enter logout.
Privileged EXEC From the User EXEC mode, enter
enable. To exit to the User EXEC mode, enter exit or
press Ctrl-Z.
Global Config From the Privileged EXEC mode, enter
configure. To exit to the Privileged EXEC mode, enter exit,
or press Ctrl-Z.
VLAN Config From the Privileged EXEC mode, enter
vlan database. To exit to the Privileged EXEC mode, enter exit,
or press Ctrl-Z.
Interface Config From the Global Config mode, enter
interface or
interface loopback or
interface tunnel
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
Line Config From the Global Config mode, enter
lineconfig. To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
Policy-Map
Config
From the Global Config mode, enter
policy-map. To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
Policy-Class-Map
Config
From the Policy Map mode enter class. To exit to the Policy Map mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
Class-Map
Config
From the Global Config mode, enter
class-map, and specify the optional
keyword ipv4 to specify the Layer 3
protocol for this class. See 3.3.1 “class-
map” on page 3 - 10 for more information.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
MAC Access-list
Config
From the Global Config mode, enter
mac access-list extended . To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
TACACS Config From the Global Config mode, enter
tacacs-server host ,
where is the IP address of the
TACACS server on your network.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
DHCP Pool
Config
From the Global Config mode, enter
ip dhcp pool . To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter Ctrl-
Z.
Table 5: CLI Command Modes (Continued)
Command Mode Prompt Mode Description