Kontron AT8404 CLI - Manual (Page 70)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 34
When the interface parameter is not specified, only the global mode of the Voice VLAN is displayed.
When the interface is specified:
.
2.6 Provisioning (IEEE 802.1p) Commands
This section describes the commands you use to configure provisioning, which allows you to prioritize ports.
2.6.1 vlan port priority all
This command configures the port priority assigned for untagged packets for all ports presently plugged into the
device. The range for the priority is 0-7. Any subsequent per port configuration will override this configuration setting.
2.6.2 vlan priority
This command configures the default 802.1p port priority assigned for untagged packets for a specific interface. The
range for the priority is 0–7.
2.7 Protected Ports Commands
This section describes commands you use to configure and view protected ports on a switch. Protected ports do not
forward traffic to each other, even if they are on the same VLAN. However, protected ports can forward traffic to all
unprotected ports in their group. Unprotected ports can forward traffic to both protected and unprotected ports. Ports
are unprotected by default.
Mode Privileged EXEC
Term Definition
Administrative
Mode
The Global Voice VLAN mode.
Term Definition
Voice VLAN Mode The admin mode of the Voice VLAN on the interface.
Voice VLAN ID
The Voice VLAN ID
Voice VLAN
Priority
The do1p priority for the Voice VLAN on the port.
Voice VLAN
Untagged
The tagging option for the Voice VLAN traffic.
Voice VLAN CoS
Override
The Override option for the voice traffic arriving on the port.
Voice VLAN Status The operational status of Voice VLAN on the port.
Format vlan port priority all
Mode Global Config
Default 0
Format vlan priority
Mode Interface Config