Kontron AT8404 CLI - Manual (Page 156)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 120
2.23.16 show lldp local-device detail
Use this command to display detailed information about the LLDP data a specific interface transmits.
2.24 LLDP-MED Commands
Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (ANSI-TIA-1057) provides an extension to
the LLDP standard. Specifically, LLDP-MED provides extensions for network configuration and policy, device
location, Power over Ethernet (PoE) management and inventory management.
2.24.1 lldp med
Use this command to enable MED. By enabling MED, you will be effectively enabling the transmit and receive
function of LLDP.
Port ID The port ID associated with this interface.
Port Description The port description associated with the interface.
Format show lldp local-device detail
Mode Privileged EXEC
Term Definition
Interface The interface that sends the LLDPDU.
Chassis ID
Subtype
The type of identification used in the Chassis ID field.
Chassis ID The chassis of the local device.
Port ID Subtype The type of port on the local device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the local device.
System
Description
Describes the local system by identifying the system name and versions of hardware,
operating system, and networking software supported in the device.
Port Description Describes the port in an alpha-numeric format.
System
Capabilities
Supported
Indicates the primary function(s) of the device.
System
Capabilities
Enabled
Shows which of the supported system capabilities are enabled.
Management
Address
The type of address and the specific address the local LLDP agent uses to send and receive
information.
Default disabled
Format lldp med
Mode Interface Config
Term Definition