Kontron AT8404 CLI - Manual (Page 83)

AT8404 Switching Commands
Page 2 - 47 AT8404 CLI Reference Manual
2.11.16 dot1x unauthenticated-vlan
Use this command to configure the unauthenticated VLAN associated with that port. The unauthenticated VLAN ID
can be a valid VLAN ID from 0-Maximum supported VLAN ID. The unauthenticated VLAN must be statically
configured in the VLAN database to be operational. By default, the unauthenticated VLAN is 0, i.e. invalid and not
operational.
2.11.16.1 no dot1x unauthenticated-vlan
This command resets the unauthenticated-vlan associated with the port to its default value.
2.11.17 dot1x user
This command adds the specified user to the list of users with access to the specified port or all ports. The
parameter must be a configured user.
2.11.17.1 no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
2.11.18 users defaultlogin
This command assigns the authentication login list to use for non-configured users when attempting to log in to the
system. This setting is overridden by the authentication login list assigned to a specific user if the user is configured
locally. If this value is not configured, users will be authenticated using local authentication only.
2.11.19 users login
This command assigns the specified authentication login list to the specified user for system login. The must
be a configured and the must be a configured login list.
If the user is assigned a login list that requires remote authentication, all access to the interface from all CLI, web,
and telnet sessions will be blocked until the authentication is complete.
Default 0
Format dot1x unauthenticated-vlan
Mode Interface Config
Format no dot1x unauthenticated-vlan
Mode Interface Config
Format dot1x user { | all}
Mode Global Config
Format no dot1x user { | all}
Mode Global Config
Format users defaultlogin
Mode Global Config