Kontron AT8404 CLI - Manual (Page 236)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 22
4.5.7 logging port
This command sets the local port number of the LOG client for logging messages. The can be in the
range from 1 to 65535.
4.5.7.1 no logging port
This command resets the local logging port to the default.
4.5.8 logging syslog
This command enables syslog logging. The parameter is an integer with a range of 1-65535.
4.5.8.1 no logging syslog
This command disables syslog logging.
4.5.9 show logging
This command displays logging configuration information.
Default 514
Format logging port
Mode Global Config
Format no logging port
Mode Global Config
Default disabled
Format logging syslog [port ]
Mode Global Config
Format no logging syslog
Mode Global Config
Format show logging
Mode Privileged EXEC
Term Definition
Logging Client
Local Port
Port on the collector/relay to which syslog messages are sent.
CLI Command
Logging
Shows whether CLI Command logging is enabled.
Console Logging Shows whether console logging is enabled.
Console Logging
Severity Filter
The minimum severity to log to the console log. Messages with an equal or lower numerical
severity are logged.
Buffered Logging Shows whether buffered logging is enabled.
Syslog Logging
Shows whether syslog logging is enabled.