Kontron AT8404 CLI - Manual (Page 311)

AT8404 Management Commands
Page 5 - 35 AT8404 CLI Reference Manual
Example: The following shows an example of the CLI command.
radius server key acct 10.240.4.10 encrypted
5.9.6 radius server msgauth
This command enables the message authenticator attribute to be used for the specified RADIUS Authenticating
server.
5.9.6.1 no radius server msgauth
The no version of this command disables the message authenticator attribute to be used for the specified RADIUS
Authenticating server.
5.9.7 radius server primary
This command specifies a configured server that should be the primary server in the group of servers which have
the same server name. Multiple primary servers can be configured for each number of servers that have the same
name. When the RADIUS client has to perform transactions with an authenticating RADIUS server of specified
name, the client uses the primary server that has the specified server name by default. If the RADIUS client fails to
communicate with the primary server for any reason, the client uses the backup servers configured with the same
server name. These backup servers are identified as the ‘Secondary’ type.
Mode Global Config
Field Description
ipaddr The IP address of the server.
dnsname The DNS name of the server.
password The password in encrypted format.
Format radius server msgauth
Mode Global Config
Field Description
ip addr The IP address of the server.
dnsname The DNS name of the server.
Format no radius server msgauth
Mode Global Config
Format radius server primary {}
Mode Global Config
Field Description
ip addr The IP address of the RADIUS Authenticating server.
dnsname The DNS name of the server.