1 no lacp actor system priority, 16 lacp partner admin key, 1 no lacp partner admin key – Kontron AT8404 CLI User Manual
Page 102: 17 lacp partner admin state, 1 no lacp partner admin state, Switching commands at8404
Switching Commands
AT8404
AT8404 CLI Reference Manual
Page 2 - 66
2.13.15.1
no lacp actor system priority
Use this command to configure the priority value associated with the Actor’s SystemID.
2.13.16
lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner. The valid range for
<key> is 0 to 65535.
2.13.16.1
no lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner.
2.13.17
lacp partner admin state
Use this command to configure the current administrative value of actor state for the protocol Partner. The valid
value range is 0x00-0xFF.
2.13.17.1
no lacp partner admin state
Use this command the configure the default current administrative value of actor state for the protocol partner.
Note: This command is only applicable to physical interfaces.
Format
lacp actor system priority
Mode
Interface Config
Default
0x0
Format
lacp partner admin key <key>
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
Format
no lacp partner admin key <key>
Mode
Interface Config
Default
0x07
Format
lacp partner admin state {individual|longtimeout|passive}
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
Format
no lacp partner admin state {individual|longtimeout|passive}
Mode
Interface Config