Kontron AT8404 CLI - Manual (Page 111)

AT8404 Switching Commands
Page 2 - 75 AT8404 CLI Reference Manual
2.13.39 show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
2.13.40 show port-channel system priority
Use this command to display the port-channel system priority.
2.13.41 show port-channel hash multicast
This command displays current port-channel hash multicast settings.
2.14 Port Mirroring
Port mirroring, which is also known as port monitoring, selects network traffic that you can analyze with a network
analyzer, such as a SwitchProbe device or other Remote Monitoring (RMON) probe.
2.14.1 monitor session
This command configures a probe port and a monitored port for monitor session (port monitoring). Use the source
interface parameter to specify the interface to monitor. Use rx to monitor only ingress packets,
or use tx to monitor only egress packets. If you do not specify an {rx | tx} option, the destination port monitors
both ingress and egress packets. Use the destination interface to specify the interface to
Format show port-channel { | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
Logical Interface Valid slot and port number separated by a forward slash.
Port-Channel
Name
The name of this port-channel (LAG). You may enter any string of up to 15 alphanumeric
characters.
Link State Indicates whether the Link is up or down.
Admin Mode May be enabled or disabled. The factory default is enabled.
Mbr Ports A listing of the ports that are members of this port-channel (LAG), in slot/port notation. There
can be a maximum of eight ports assigned to a given port-channel (LAG).
Device Timeout For each port, lists the timeout (long or short) for Device Type (actor or partner).
Port Speed Speed of the port-channel port.
Type The status designating whether a particular port-channel (LAG) is statically or dynamically
maintained.
• Static - The port-channel is statically maintained.
• Dynamic - The port-channel is dynamically maintained.
Active Ports This field lists ports that are actively participating in the port-channel (LAG).
Format show port-channel system priority
Mode Privileged EXEC
Format show port-channel hash multicast
Mode Privileged EXEC