Kontron AT8404 CLI - Manual (Page 234)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 20
4.4.27 show boardinfo memory-usage
This command displays the memory usage. It shows malloc and kernel statistics.
4.5 Logging Commands
This section describes the commands you use to configure system logging, and to view logs and the logging
settings.
4.5.1 logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
4.5.1.1 no logging buffered
This command disables logging to in-memory log.
4.5.2 logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full capacity. Otherwise when the
log file reaches full capacity, logging stops.
4.5.2.1 no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop when the log file capacity is
full.
4.5.3 logging cli-command
This command enables the CLI command logging feature, which enables the FASTPATH software to log all CLI
commands issued on the system.
Format show boardinfo memory-usage
Mode Priviledged EXEC
Default disabled; critical when enabled
Format logging buffered
Mode Global Config
Format no logging buffered
Mode Global Config
Default enabled
Format logging buffered wrap
Mode Privileged EXEC
Format no logging buffered wrap
Mode Privileged EXEC
Default enabled