5 storm-control broadcast all level, 1 no storm-control broadcast all level, 6 storm-control broadcast all rate – Kontron AT8404 CLI User Manual
Page 90: 1 no storm-control broadcast all rate, 7 storm-control multicast, Storm-control broadcast all level - 54, Storm-control broadcast all rate - 54, Storm-control multicast - 54, Switching commands at8404
Switching Commands
AT8404
AT8404 CLI Reference Manual
Page 2 - 54
2.12.5
storm-control broadcast all level
This command configures the broadcast storm recovery threshold for all interfaces as a percentage of link speed
and enables broadcast storm recovery. If the mode is enabled, broadcast storm recovery is active, and if the rate of
L2 broadcast traffic ingressing on an interface increases beyond the configured threshold, the traffic will be dropped.
Therefore, the rate of broadcast traffic will be limited to the configured threshold.This command also enables
broadcast storm recovery mode for all interfaces.
2.12.5.1
no storm-control broadcast all level
This command sets the broadcast storm recovery threshold to the default value for all interfaces and disables
broadcast storm recovery.
2.12.6
storm-control broadcast all rate
Use this command to configure the broadcast storm recovery threshold for all interfaces in packets per second. If
the mode is enabled, broadcast storm recovery is active, and if the rate of L2 broadcast traffic ingressing on an
interface increases beyond the configured threshold, the traffic is dropped. Therefore, the rate of broadcast traffic is
limited to the configured threshold.
2.12.6.1
no storm-control broadcast all rate
This command sets the broadcast storm recovery threshold to the default value for all interfaces and disables
broadcast storm recovery.
2.12.7
storm-control multicast
This command enables multicast storm recovery mode for an interface. If the mode is enabled, multicast storm
recovery is active, and if the rate of L2 multicast traffic ingressing on an interface increases beyond the configured
threshold, the traffic will be dropped. Therefore, the rate of multicast traffic will be limited to the configured threshold.
Format
no storm-control broadcast all
Mode
Global Config
Default
5
Format
storm-control broadcast all level
<0-100>
Mode
Global Config
Format
no storm-control broadcast all level
Mode
Global Config
Default
0
Format
storm-control broadcast rate <0-33554431>
Mode
Global Config
Format
no storm-control broadcast all rate
Mode
Global Config
Default
disabled