Kontron AT8404 CLI - Manual (Page 228)

Utility Commands AT8404
AT8404 CLI Reference Manual Page 4 - 14
If you enter the interface parameter, in addition to the MAC Address and Status fields, the
following field appears:
The following information displays if you enter the count parameter:
4.4.8 show process cpu
This command provides the percentage utilization of the CPU by different tasks.
The following shows example CLI display output for the command.
(Broadcom FASTPATH Routing) #show process cpu
Mem: 52416K used, 74048K free, 0K shrd, 0K buff, 24976K cached
Load average: 0.16, 0.18, 0.12 (State: S=sleeping R=running, W=waiting)
Status The status of this entry. The meanings of the values are:
• Static—The value of the corresponding instance was added by the system or a user when
a static MAC filter was defined. It cannot be relearned.
• Learned—The value of the corresponding instance was learned by observing the source
MAC addresses of incoming traffic, and is currently in use.
• Management—The value of the corresponding instance (system MAC address) is also the
value of an existing instance of dot1dStaticAddress. It is identified with interface 0/1. and
is currently used when enabling VLANs for routing.
• Self—The value of the corresponding instance is the address of one of the switch’s
physical interfaces (the system’s own MAC address).
• GMRP Learned—The value of the corresponding was learned via GMRP and applies to
Multicast.
• Other—The value of the corresponding instance does not fall into one of the other
categories.
Term Definition
VLAN ID The VLAN on which the MAC address was learned.
Term Definition
Dynamic Address
count
Number of MAC addresses in the forwarding database that were automatically learned.
Static Address
(User-defined)
count
Number of MAC addresses in the forwarding database that were manually entered by a user.
Total MAC
Addresses in use
Number of MAC addresses currently in the forwarding database.
Total MAC
Addresses
available
Number of MAC addresses the forwarding database can handle.
Note: It is not necessarily the traffic to the CPU, but different tasks that keep the CPU busy.
Format show process cpu
Mode Privileged EXEC
Term Definition