19 ip dhcp bootp automatic, 1 no ip dhcp bootp automatic, 20 ip dhcp conflict logging – Kontron AT8404 CLI User Manual
Page 256: 1 no ip dhcp conflict logging, 21 clear ip dhcp binding, 22 clear ip dhcp server statistics, Ip dhcp bootp automatic - 42, Ip dhcp conflict logging - 42, Clear ip dhcp binding - 42, Clear ip dhcp server statistics - 42
Utility Commands
AT8404
AT8404 CLI Reference Manual
Page 4 - 42
4.8.19
ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The addresses are from the automatic
address pool.
4.8.19.1
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are from the automatic
address pool.
4.8.20
ip dhcp conflict logging
This command enables conflict logging on DHCP server.
4.8.20.1
no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
4.8.21
clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database. If “*” is specified, the bindings
corresponding to all the addresses are deleted. is a valid IP address made up of four decimal bytes
ranging from 0 to 255. IP address 0.0.0.0 is invalid.
4.8.22
clear ip dhcp server statistics
This command clears DHCP server statistics counters.
Default
disabled
Format
ip dhcp bootp automatic
Mode
Global Config
Format
no ip dhcp bootp automatic
Mode
Global Config
Default
enabled
Format
ip dhcp conflict logging
Mode
Global Config
Format
no ip dhcp conflict logging
Mode
Global Config
Format
clear ip dhcp binding { | *}
Mode
Privileged EXEC
Format
clear ip dhcp server statistics
Mode
Privileged EXEC