Kontron AT8404 CLI - Manual (Page 74)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 38
2.8.4 show garp
This command displays GARP information.
2.9 GVRP Commands
This section describes the commands you use to configure and view GARP VLAN Registration Protocol (GVRP)
information. GVRP-enabled switches exchange VLAN configuration information, which allows GVRP to provide
dynamic VLAN creation on trunk ports and automatic VLAN pruning.
2.9.1 set gvrp adminmode
This command enables GVRP on the system.
2.9.1.1 no set gvrp adminmode
This command disables GVRP.
2.9.2 set gvrp interfacemode
This command enables GVRP on a single port (Interface Config mode) or all ports (Global Config mode).
Mode • Interface Config
• Global Config
Format show garp
Mode • Privileged EXEC
• User EXEC
Term Definition
GMRP Admin
Mode
The administrative mode of GARP Multicast Registration Protocol (GMRP) for the system.
GVRP Admin Mode The administrative mode of GARP VLAN Registration Protocol (GVRP) for the system.
Note: If GVRP is disabled, the system does not forward GVRP messages.
Default disabled
Format set gvrp adminmode
Mode Privileged EXEC
Format no set gvrp adminmode
Mode Privileged EXEC
Default disabled
Format set gvrp interfacemode
Mode • Interface Config
• Global Config