Kontron AT8404 CLI - Manual (Page 78)

Switching Commands AT8404
AT8404 CLI Reference Manual Page 2 - 42
and then the authentication methods are set in the authentication login list. The maximum number of authentication
login methods is three. The possible method values are local, radius and reject.
The value of local indicates that the user’s locally stored ID and password are used for authentication. The value
of radius indicates that the user’s ID and password will be authenticated using the RADIUS server. The value of
reject indicates the user is never authenticated.
To authenticate a user, the first authentication method in the user’s login (authentication login list) is attempted.
FASTPATH software does not utilize multiple entries in the user’s login. If the first entry returns a timeout, the user
authentication attempt fails.
2.11.1.1 no authentication login
This command deletes the specified authentication login list. The attempt to delete fails if any of the following
conditions are true:
• The login list name is invalid or does not match an existing authentication login list
• The specified authentication login list is assigned to any user or to the non configured user for any component
• The login list is the default login list included with the default configuration and was not created using
‘authentication login’. The default login list cannot be deleted.
2.11.2 clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
2.11.3 clear radius statistics
This command is used to clear all RADIUS statistics.
2.11.4 dot1x default-login
This command assigns the authentication login list to use for non-configured users for 802.1x port security. This
setting is over-ridden by the authentication login list assigned to a specific user if the user is configured locally. If this
value is not configured, users will be authenticated using local authentication only.
Note: The default login list included with the default configuration can not be changed.
Format authentication login [ [ []]]
Mode Global Config
Format no authentication login
Mode Global Config
Format clear dot1x statistics { | all}
Mode Privileged EXEC
Format clear radius statistics
Mode Privileged EXEC