Kontron AT8404 CLI - Manual (Page 167)

AT8404 Switching Commands
Page 2 - 131 AT8404 CLI Reference Manual
2.26.3 show mac-address-table multicast
This command displays the Multicast Forwarding Database (MFDB) information. If you enter the command with no
parameter, the entire table is displayed. You can display the table entry for one MAC Address by specifying the MAC
address as an optional parameter.
2.26.4 show mac-address-table stats
This command displays the Multicast Forwarding Database (MFDB) statistics.
2.27 ISDP Commands
This section describes the commands you use to configure the industry standard Discovery Protocol (ISDP).
2.27.1 isdp run
This command enables ISDP on the switch.
Format show mac-address-table multicast
Mode Privileged EXEC
Term Definition
MAC Address A multicast MAC address for which the switch has forwarding and or filtering information. The
format is two-digit hexadecimal numbers separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as a MAC address
and VLAN ID combination of 8 bytes.
Type The type of the entry. Static entries are those that are configured by the end user. Dynamic
entries are added to the table as a result of a learning process or protocol.
Component The component that is responsible for this entry in the Multicast Forwarding Database.
Possible values are IGMP Snooping, GMRP, and Static Filtering.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Forwarding
Interfaces
The resultant forwarding list is derived from combining all the component’s forwarding
interfaces and removing the interfaces that are listed as the static filtering interfaces.
Format show mac-address-table stats
Mode Privileged EXEC
Term Definition
Total Entries The total number of entries that can possibly be in the Multicast Forwarding Database table.
Most MFDB Entries
Ever Used
The largest number of entries that have been present in the Multicast Forwarding Database
table. This value is also known as the MFDB high-water mark.
Current Entries The current number of entries in the MFDB.
Default Enabled
Format isdp run
Mode Global Config