Kontron AT8404 CLI - Manual (Page 103)

AT8404 Switching Commands
Page 2 - 67 AT8404 CLI Reference Manual
2.13.18 lacp partner admin state individual
Use this command to set LACP partner admin state to individual.
2.13.18.1 no lacp partner admin state individual
Use this command to set the LACP partner admin state to aggregation.
2.13.19 lacp partner admin state longtimeout
Use this command to set LACP partner admin state to longtimeout.
2.13.19.1 no lacp partner admin state longtimeout
Use this command to set the LACP partner admin state to short timeout.
2.13.20 lacp partner admin state passive
Use this command to set the LACP partner admin state to passive.
Format lacp partner admin state individual
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp partner admin state individual
Mode Interface Config
Format lacp partner admin state longtimeout
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format no lacp partner admin state longtimeout
Mode Interface Config
Note: This command is only applicable to physical interfaces.
Format lacp partner admin state passive
Mode Interface Config
Note: This command is only applicable to physical interfaces.